Before Picture
Before
After Picture
After

Cleaning Trial Summary

Fabricated Metal Product :: TSR #13-AP-090

Download

 

The customer was looking to improve their cleaning performance, reduce rework and reject rate and eliminate hazardous chemicals and waste.

Cleaning Trial Type
Temperature
Mold Cleaning
160⁰F
Industry
Time Required
Parts molding manufacturing
1 to 3.5 hours
Segment
Substrate
Fabricated Metal Product
Ceramic Coated Graphite, Ceramic Coated Stainless Steel
Soil
Paint (Latex)
Description of Part(s)
Ceramic coated molds
Cleaner Used

5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner

100% by volume ARMAKLEEN™ Paint & Ink Remover

Machine Used
  1. Ultrasonic Washer (SK 6315)
  2. Spray Under Immersion Washer (Graymills T12, Graymills T24, SK 81.8 w/ SUI)
  3. Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000)
Post Cleaning

Fresh water rinse followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommended using 5% by volume ArmaKleen™ 4 in 1 Cleaner at 160⁰F in an Ultrasonic Washer or a Spray Under Immersion Washer for a minimum of 1 hour. The ArmaKleen Technical Center also recommended using 100% by volume ArmaKleen™ Paint and Ink Remover at 160⁰F in an Ultrasonic Washer, a Spray Under Immersion Washer or a Spray Washer for a minimum of 1 to 3.5 hours.