Before
After

Cleaning Trial Summary

Machine Manufacturing :: TSR #16-A-108

Download

 

The customer was is looking to improve their cleaning performance, reduce rework and reject rate and recover scrap parts.

Cleaning Trial Type
Temperature
Aqueous
160°F
Industry
Time Required
Ariel work platform manufacturing
15 minutes
Segment
Substrate
Machine Manufacturing
Rubber, Steel
Soil
Liquid epoxy paint, Oil
Description of Part(s)
An assortment of steel plates, steel bolts, steel nuts and steel bolts with rubber gaskets
Cleaner Used

5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner

10% by volume ARMAKLEEN™ Paint & Ink Remover

Machine Used

·         Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000

·         Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

Post Cleaning

Fresh water rinse followed by air pressure drying

Recommendation to Customer

The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 160°F in a Spray Washer for a minimum of 15 minutes or a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 160°F in a Spray-Under Immersion Washer for a minimum of 15 minutes.