800.332.5424
Cleaning Trial Summary
The customer was looking to improve their cleaning performance, automate their cleaning process, reduce rework and reject rate, eliminate hazardous chemicals/waste and reduce VOCs.
Cleaning Trial Type
Temperature
Aqueous
150°F
Industry
Time Required
Manufacturing of metering
2+ hours
Segment
Substrate
Machine Manufacturing
Brass, Stainless Steel, Steel
Soil
Grease, Grime, Oil, Shop Dirt
Description of Part(s)
five steel, stainless steel and brass harness type brackets
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
Machine Used
· Agitating Immersion (SK Model 81.8, Graymills T24)
· Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Fresh rinse followed by air pressure drying
Recommendation to Customer
The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in an Agitating Immersion Washer for a minimum of 2+ hours or at 150°F in a Spray-Under Immersion Washer for a minimum of 2+ hours.
