Before Picture
Before
After Picture
After

Cleaning Trial Summary

Fabricated Metal Product :: TSR #13-P-031

Download

 

The customer was looking to improve their cleaning performance, reduce their cleaning costs, eliminate hazardous waste and chemicals and reduce VOC’s.

Cleaning Trial Type
Temperature
Ink
160⁰F
Industry
Time Required
Screen printing
1.5 hours
Segment
Substrate
Fabricated Metal Product
Aluminum, Ceramic, Steel
Soil
Screen ink
Description of Part(s)
5” diameter steel, aluminum and ceramic dishes
Cleaner Used

100% by volume ARMAKLEEN™ Paint & Ink Remover

Machine Used
  • Spray Under Immersion (T12, T24, 40.1, 81.8 w/ SUI)
  • Spray Washer (TL3, FL250, FL500)
Post Cleaning

Light brushing with a nylon bristle brush during fresh water rinsing followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommended using 100% by volume ArmaKleen™ Paint and Ink Remover at 160⁰F in a Spray Under Immersion Washer or a Spray Washer for a minimum of 1.5 hours.